MAC Address
Enter the Access Point’s MAC address that you would like to
extend the wireless coverage of into the MAC address filter.
Mode
Select
Disable
or
Enable
from the drop down list.
Accept / Cancel
Press
Accept
to confirm the changes or
Cancel
to return to the
previous settings.
Please make note of the following:
1.
Accept does not apply the changes – you must go to Status -> Save / Load to apply
the new settings. Please refer to Chapter 4.1 for more information.
2. You must enter the MAC address of the Access Point whose wireless coverage you
would like to extend. Not all Access Point supports this feature.
