manualshive.com logo in svg

EnGenius EAP1750H, User Manual

Share
Download
EnGenius EAP1750H User Manual Download Page 62

62

Europe – EU Declaration of Conformity

This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following test methods have been applied in order 
to prove presumption of conformity with the essential requirements of the R&TTE Directive 1999/5/EC: 

  • EN60950-1

    Safety of Information Technology Equipment

  • EN50385

 

  Generic standard to demonstrate the compliance of electronic and electrical apparatus with the basic restrictions related to human exposure 

to electromagnetic fields (0 Hz - 300 GHz)

  •  EN 300 328

 

  Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband Transmission systems; Data transmission equipment operating 

in the 2,4 GHz ISM band and using spread spectrum modulation techniques; Harmonized EN covering essential requirements under article 
3.2 of the R&TTE Directive

  •  EN 301 893 

    Broadband Radio Access Networks (BRAN); 5 GHz high performance RLAN; Harmonized EN covering essential requirements of article 3.2 of 

the R&TTE Directive

  •  EN 301 489-1 

    Electromagnetic compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and 

services; Part 1: Common technical requirements

  •  EN 301 489-17
  

Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and 
services; Part 17: Specific conditions for 2,4 GHz wideband transmission systems and 5 GHz high performance RLAN equipment

Appendix C - CE Interference Statement

Summary of Contents for EAP1750H

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands