~26~
Handset and Charger Installation
1. Plug the transformer end of the Charger AC/DC adapter into a standard AC
electric power outlet, plug the other end into the “DC In” jack on the back of
the Charger.
2. Install the battery pack onto the handset.
3. Install the handset antenna.
4. Place the handset onto the charger slot.
5. Fully charge the battery for three hours before use.
6. The phone system is now ready to perform basic functions such as making and
receiving phone calls and intercom calls. No base station or handset
programming is needed for basic operations.
Note:
1.
Ha ndset(s) packaged a long with a Base Station are pre-registered a t
the fa ctory. If you have a new handset, you will need to register the
ha ndset with the base s tation in order to be recognized a s a member
ha ndset by the base(s) a nd by other handsets. See Handset
Regi stration.
2.
Ful ly cha rge battery pa cks before the first usage.
