Chapter 3: Installation
Engage Communication
CHUB•E User Guide
6
•
If installing slot cards into an empty chassis, load the slot cards starting from the
RIGHT #1 (next to the Power Supplies) going to the LEFT #15. ←
Figure 7 - Empty CHUB•E Chassis
•
Make sure that the console port is aligned toward the bottom of the chassis
•
Align the metal slot card to the desired slot for installation
•
Gently slide the slot card all the way into the slot
•
Use the thumb screws to fully seat the slot card into the slot
Figure 8 - Slot Card Installation
NOTE:
Be sure slot cards that have a Daughter Card (2 PCBs) are NOT inserted in the slot next to
the PCB. This will cause damage to the assembly. It is recommended to install right to left.
NOTE:
To remove a slot card, reverse the above steps