BlackDoor Duo
Engage Black
3 Installation of BlackDoor Duo
This section provides details on the physical location and connections required for the installation of
Engage BlackDoor Duo equipment. Also covered is the initial communication with BlackDoor Duo.
References are made to BlackDoor Duo Command Line Interface as well as Conguration and
Operation. These topics are covered in detail in later chapters.
The use of Engage BlackDoor Duo systems to encrypt trac between two Ethernet LANs over an
IP network requires one BlackDoor Duo unit at each end.
A standard BlackDoor Duo package includes:
BlackDoor Duo unit - with installed LAN interface
Console port adapter and cable
Power Converter (110 or 220 VAC input/12 VDC output)
Documentation Compact Disk with BlackDoor Duo User's Guide and conguration examples
3.1 Installing the Hardware
3.1.1 Locating BlackDoor Duo
Site consideration is important for proper operation of BlackDoor Duo. The user should install the
unit in an environment providing:
A well-ventilated indoor location
Access within six feet of a power outlet
Two feet additional clearance around the unit to permit easy cable connection
As an option, BlackDoor Duo can be mounted in a standard 19 inch equipment rack, (rack mounts
are available from Engage).
3.1.2 Powering BlackDoor Duo
Engage BlackDoor Duo units utilize an external power adapter, available in 110 VAC and 220 VAC
versions, providing DC output.
The appropriate power adapter is provided with each unit. Ensure the power adapter is not
connected to power then plug the DC adapter into the rear panel POWER connector.
3.1.3 Console Port
BlackDoor Duo includes a Console port for initial conguration. It may be used for serial
communication from a local workstation or for remote connection via a modem. The Console port
utilizes a USB port.
Please use the provided USB to DB9 serial converter to connect to the BlackDoor Duo's USB port.
The DB9 side of the cable will connect to a computer that is running a Terminal Server program
(TeraTerm, HyperTerm, etc.). It is typical to connect the DB9 to another USB to DB9 serial
converter as DB9 serial ports are not common on todays computers. In this case, use the NULL
3 INSTALLATION OF BLACKDOOR DUO
Page 9