ENFORCER Proximity Card Reader
6
SECO-LARM U.S.A., Inc.
Programming:
1.
Add a new user card:
Action
Reaction
Tap a master card 1 time
2 Beeps, LED flashes
GREEN
Wait 3 seconds
1 Beep,
GREEN
flashes continue
Tap a blank card 1 time
1 Beep, the card is now a user card
Tap more blank cards 1 time each to
create more user cards
1 Beep for each new user card
Exit – To exit programming mode, tap a master card 1 time or wait 15 seconds
NOTE
– Attempting to add a previously-learned user card or master card will cause the unit to
beep twice and the LED to flash
RED
.
2.
Delete the user card following this user card:
Use this to delete a missing user card.
Action
Reaction
Tap a master card 2 times
2 Beeps after first tap, 1 more beep after second
tap, LED flashes
GREEN
Wait 3 seconds
2 Beeps,
GREEN
flashes continue
Tap the user card that was added
just before the card to be deleted
2 Beeps, the desired user card is deleted
Exit – To exit programming mode, tap a master card 1 time or wait 15 seconds
NOTE
– Attempting to delete a blank card or a master card will cause the unit to beep twice
and the LED to flash
RED
.
3.
Delete this user card:
Use this to delete a user card that is in your possession.
Action
Reaction
Tap a master card 3 times
2 Beeps after first tap, 1 more beep after each
subsequent tap, LED flashes
GREEN
Wait 3 seconds
3 Beeps,
GREEN
flashes continue
Tap the user card to be deleted
3 Beeps, the user card is deleted
Exit – To exit programming mode, tap a master card 1 time or wait 15 seconds
NOTE
– Attempting to delete a blank card or a master card will cause the unit to beep twice
and the LED to flash
RED
.
4.
Delete all user cards:
Action
Reaction
Tap a master card 4 times
2 Beeps after first tap, 1 more beep after each
subsequent tap, LED flashes
GREEN
Wait 3 seconds
4 Beeps,
GREEN
flashes continue
WITHIN 3 SECONDS, tap the
master card again.
4 Quick beeps, all user cards are deleted
Exit – The unit automatically exits to standby mode
ENFORCER Proximity Card Reader
SECO-LARM U.S.A., Inc.
7
5.
Add a new master card
(
WARNING – Master cards cannot be deleted.
See pg. 10,
System Reset
for instructions on clearing all cards from memory.):
Action
Reaction
Tap a master card 5 times
2 Beeps after first tap, 1 more beep after each
subsequent tap, LED flashes
GREEN
Wait 3 seconds
5 Beeps,
GREEN
flashes continue
Tap a blank or user card
2 Beeps, the card is now a master card
Tap more blank or user cards 1 time
each to create more master cards
2 Beeps for each new master card
Exit – To exit programming mode, tap a master card 1 time or wait 15 seconds
6.
Set the door-release timer
(Default: 5 seconds):
Action
Reaction
Tap a master card 6 times
2 Beeps after first tap, 1 more beep after each
subsequent tap, LED flashes
GREEN
Wait 3 seconds
6 Beeps,
GREEN
flashes continue
Count the beeps
1 Beep = 1 second for the door release timer
Tap the master card to stop the
beeps at the desired time
The timer is now set for the number of seconds
Exit – The unit automatically exits to standby mode
7.
Show how many user cards have been programmed:
Action
Reaction
Tap a master card 7 times
2 Beeps after first tap, 1 more beeps after each
subsequent tap, LED flashes
GREEN
Wait 3 seconds
7 Beeps,
GREEN
flashes continue
Wait 1.5 seconds
Silence
Count beeps for the first digit
Long beep = 0 or 1 beep = 1
Wait 1 second
Silence
Count beeps for the second digit
Long beep = 0 or 1~9 beeps = 1~9
Wait 1 second
Silence
Count beeps for the third digit
Long beep = 0 or 1~9 beeps = 1~9
Exit – The unit automatically exits to standby mode
Counting the beeps
– The number of beeps indicates the value of each digit. All three digits
together give the number of user cards that have already been programmed.
Some examples:
Number of user cards
Beep sequence
13
Long beep / 1 beep / 3 beeps
24
Long beep / 2 beeps / 4 beeps
7
Long beep / Long beep / 7 beeps
100
1 Beep / Long beep / Long beep
