ENFORCER HDMI Extender over Single Cat5e/6
SECO-LARM U.S.A., Inc.
5
DIP Switch Configuration
Cable Length
0~24ft
(0~7m)
25~49ft
(7m~15m)
50~74ft
(15m~23m)
75~99ft
(23m~30m)
DIP Switch Configuration
Cable Length
100~115ft
(30m~35m)
116~131ft
(35m~40m)
132~147ft
(40m~45m)
148~164ft
(45m~50m)
EDID Settings:
The MVE-AH1E1-01NQ includes an Extended Display Identification Data (EDID) management
switch to match the display settings to the source device. This setting is used when the display is
not properly displaying an image from the source device.
When in position 1 (default: position 1), the extender will copy the transmitter HDMI loop display
to the source.
When in position 2, the extender will copy the receiver HDMI display EDID to the source.
HDMI Loop Output:
The MVE-AH1E1-01NQ includes a secondary HDMI output on the transmitter unit. This HDMI
output can be used for local displays that are in the same location as the HDMI source.
EDID Switch
HDMI Input
HDMI Output
Position 1
Equalizer DIP Switch Settings:
The equalizer DIP switch settings allow for control of signal strength based on cable length and
reduction of digital noise. See chart below for DIP switch configurations.
Position 2
