ENFORCER 4-in-1 HD Cameras (TVI, CVI, AHD, Analog)
SECO-LARM U.S.A., Inc.
3
How to use the OSD Controller:
Switching between HD Analog Outputs:
Navigating the OSD:
1.
Press down (enter) on the joystick.
The Main Menu will be displayed on the
monitor.
2.
Move to and highlight the required function by
moving the joystick up and down.
3.
Select the required function by pressing enter
on the joystick.
4.
Change the menu setting by moving the
joystick left or right.
5.
After choosing the settings, move the cursor to EXIT and select the option to SAVE & END,
RESET, or NOT SAVE.
6.
Press enter on the joystick to make the selection and leave the OSD menu.
NOTE: A submenu is available where the menu displays
.
1.
Press down on the joystick to open the on-screen display (OSD) menu.
2.
Use the joystick to navigate the OSD menu.
3.
To select an item, press down (enter) on the joystick.
To set format via the OSD controller, press the controller in the direction of the desired setting,
hold for 5 seconds, and release when the camera restarts. See chart below.
OSD
Controller
UP
Direction Format Setting
Up
CVI
Down
TVI
Left
CVBS
Right
AHD
