1000 TVL Camera On-Screen Display Manual
SECO-LARM
U.S.A., Inc.
6
This function controls exposure via one of four modes (Brightness, Shutter, Sens-Up, and AGC).
1. Move the joystick up or down to highlight EXPOSURE on the SETUP menu screen.
2. Select the desired mode by moving the joystick left or right.
3. Select RETURN to return to the SETUP menu.
A. Brightness: Adjust the overall brightness level
(0~20).
B. Shutter: Adjust the shutter speed.
i. AUTO: Automatically adjust the shutter
speed.
ii. MANUAL: Manually adjust the shutter speed
(1/60~1/60,000).
iii. FLICKER: Select FLICKER to avoid image
flickering in different frequencies.
C. Sens-Up: Slow the shutter speed to allow the
sensor to accumulate more light (2x~32x).
D. Automatic Gain Control (AGC): A higher level of
AGC increases brightness, but also increases any
noise (0~20).
2. EXPOSURE
BRIGHTNESS
SHUTTER
SENS-UP
AGC
RETURN
AUTO
X16
IIIIIIIIII IIIIIIIIII
|
10
IIIIIIIIII IIIIIIIIII
|
15
MENU
1. LENS
2. EXPOSURE
3. WHITE BAL
4. BACKLIGHT
5. DNR
6. DAY&NIGHT
7. IMAGE
8. SYSTEM
9. SPECIAL
10. EXIT
DC
ATW
OFF
MIDDLE
EXTERN
Lens:
This function controls the camera’s lens operation.
1. Move the joystick up or down to highlight LENS on the SETUP menu screen.
2. Select the desired mode by moving the joystick left or right.
3. Select RETURN to return to the SETUP menu.
A. DC: Select DC for a DC lens, and choose a
setting based on the operating environment
(INDOOR / OUTDOOR / DEBLUR)
B. Manual: Select Manual for a Manual lens,
and choose a setting based on the operating
environment (NORMAL / DEBLUR)
Exposure:
MENU
1. LENS
2. EXPOSURE
3. WHITE BAL
4. BACKLIGHT
5. DNR
6. DAY&NIGHT
7. IMAGE
8. SYSTEM
9. SPECIAL
10. EXIT
DC
ATW
OFF
MIDDLE
EXTERN
