manualshive.com logo in svg

ENFORCER EV-C1303-NMGQ, Manual

Share
Download
ENFORCER EV-C1303-NMGQ Manual Download Page 11

1000 TVL Camera On-Screen Display Manual 

SECO-LARM

 U.S.A., Inc.

11

System:

This function is used to change the viewing 

angle, switch between PAL and NTSC 

systems, and reset the camera settings.

1. Move the joystick up or down to highlight SYSTEM  

on the SETUP menu screen.

2. Select the desired mode by moving the joystick left 

or right.

3. Select RETURN to return to the SETUP 

menu.

A. COM: Not used.

B. VIEW ANGLE: Adjust the aspect ratio 

(WIDE 4:3 / WIDE 16:9 / NORMAL).

i.  XY ADJUST: Adjust the screen image 

(Left/Right and Up/Down).

NOTE: XY ADJUST is only available when WIDE 

16:9 or NORMAL has been selected from the VIEW 

ANGLE menu. 

 

MENU

1. LENS
2. EXPOSURE
3. WHITE BAL
4. BACKLIGHT
5. DNR
6. DAY&NIGHT
7. IMAGE

8. SYSTEM

9. SPECIAL
10. EXIT

DC

ATW
OFF
MIDDLE
EXTERN

8. SYSTEM

COM.
VIEW ANGLE
CVBS
RESET
RETURN

WIDE  4 : 3 
NTSC
ON

XY ADJUST

     (+0   /±0)

     (+0   /±120)

LEFT / RIGHT

UP /DOWN 

 ENTER - RETURN

XY ADJUST

     (+0   /±160)
     (+0   /±120)

LEFT / RIGHT

UP /DOWN 

 ENTER - RETURN

Summary of Contents for EV-C1303-NMGQ

















Reviews:

No comments

Brands by name

Popular brands

Load more brands