ENFORCER Passive Video Transceivers
4
SECO-LARM U.S.A., Inc.
Shelf/Table Mounting:
1.
Units may be stacked one on top of the
other, or with other equipment.
Note:
Do not stack more than 70-lbs
on
top of the passive video
transceiver.
2.
Make sure the rubber feet are firmly
attached to the base of the passive
video transceiver.
Wall Mounting:
Rack Mounting
(EB-P116-01Q only)
:
1.
Screw the mounting brackets onto the unit facing forward.
2.
Find 1U of space in your equipment rack and screw the unit in place.
Note:
No rear support rails are needed. The unit can be fully supported using the
mounting brackets provided.
1.
Screw the mounting brackets on,
facing downward.
2.
Use mounting screws or bolts (not
included) to mount the unit in the
desired location.
Note:
Make sure that the screws/bolts
and mounting surface can support the
weight of the unit.
Rubber Foot
Equipment Rack Vertical Support
Mounting
Bracket
Mounting
Screws*
*The screws included with the unit are for installing the mounting brackets. Screws for mounting the unit to an IT rack are not included.
16-Channel Passive Video
Transceiver (EB-P116-01Q)
4-Channel Passive
Video Transceiver
(EB-P116-01Q)
