ENFORCER Passive Video Transceivers
SECO-LARM U.S.A., Inc.
5
DVR
Coaxial Cable
Wiring:
1.
Run a Cat5e/6 UTP cable from each camera through the wall or through a conduit to
the EB-P104-01Q or EB-P116-01Q.
Note:
If existing telecom or data UTP cables are available, they can be mixed and
matched with new cables. Running two or more cables together should not affect the
video signals.
2.
Connect a video balun or multi-channel passive video transceiver to a pair of wires from
the UTP cable near the CCTV camera, and then connect the video balun to the camera.
3.
Connect the matching pair of wires on the other end of the cable to the desired terminal
blocks on the back of the EB-P104-01Q or EB-P116-01Q.
Note:
ENFORCER Passive Video Transceivers also have the option of connecting
Cat5e/6
cable through RJ45 instead of terminal blocks. Please see pg. 3 for wiring
specifications.
Connecting to a DVR, Video Switcher, or Multiplexer:
1.
Run one coaxial cable (not included) from the Video Out on the EB-P104-01Q or
EB-P116-01Q to the corresponding Video In port of the DVR, video switcher, or
multiplexer (not included).
2.
Repeat the above as necessary until each occupied channel is connected to the DVR,
video switcher, or multiplexer.
Using an RJ45 Connection
Color: Up to 1,300ft (400m)
B/W: Up to 1,950ft (600m)
ENFORCER
Dome Camera
Cat5e/6
Using a Passive Balun
Color: Up to 1,300ft (400m)
B/W: Up to 1,950ft (600m)
ENFORCER
Dome Camera
Passive Video Transceiver
(EB-P116-01Q)
