background image

Copyright ®2018 Enforcement Technology Group, Inc. (ETGI). All Rights Reserved. Pricing/Specification Are Subject to Change Without Notice.

WIRELESS REMOTE AUDIO PERIMETER SHARING SYSTEM

OPERATIONS MANUAL

Version: 03/18

WRAPS

Warning:

The Client purchases and uses the WRAPS

System at his/her own risk. Client must carefully read instructions, safety materials and all 

other System literature before use; and follow these instructions, procedures and rules. The System is intended for use by individuals 

properly trained by approved instructors to determine where the System fits into his/her department’s rules, regulations, policies and 

procedures.

Compliance with Local Laws:

It is the Client’s responsibility to ensure the purchase, handling and usage of the WRAPS

System complies with all local, state, and 

federal laws and regulations.

Product Changes:

Client understands that ETGI may from time to time change the WRAPS

System’s specifications, designs, accessories and/or may add or 

remove items from the System’s product line without prior notice to users.

Support/Sales Information:

Enforcement Technology Group, Inc. (ETGI)

400 N. Broadway Suite 400

Milwaukee, WI  53202  USA

Email: 

[email protected]

Phone: 800‐873‐2872/414‐276‐4471 

Fax: 414‐276‐1533

Visit: 

www.etgi.us

Summary of Contents for ETG-WRAPS-SYS













Reviews: