Enfora Enfora Mini MT, User Manual

Page: 42 / 54

4.4 Set GeoFence
There are two user-definable buttons on the Mini MT. The first button is factory-defined to set a geo-
fence. Depressing the Geo-Fence button will place a half-mile radius circular geo-fence around the Mini
MT. When the Mini MT exits the geo-fence an alert message will be sent via SMS message to the SMS
Destination Address defined in the AT$SMSDA field. (Messages and alerts can also be sent via GPRS packet
data. The user has the ability to control the IP and port that the packet data is transmitted to)
The factory default configuration of the Mini MT will not have any SMS Destination Addresses configured
and will not be capable of generating SMS messages for Geo-Fence events.
User Definable Buttons
The Mini MT "ʘ" button is user-definable through the event engine. The default state is to configure a ½
mile radius geo-fence at the current location.
The Mini MT "<" button is user-definable through the event engine. This button function is not defined
from the factory.
4.5 Setting the Emergency Call Number
The Mini MT is capable of dialing an emergency number (AT$EMERNUM) and a dispatch number
(AT$DSPATCH). The default emergency number in the Mini MT is “411.” The provider should reconfigure
this number to the correct emergency number for the region the Mini MT will operate in.
To set the emergency number to “911” enter the following text in the terminal window:
AT$EMERNUM=“911” <enter>
AT&W <enter>
The first command sets the emergency number to 911 and the second command saves the setting.