Enerzone Solution 2.9, Manual

Page: 10 / 41

9
2.1.2 Installation of the decorative u-shaped inserts
Your freestanding Enerzone wood stove is equipped with decorative u-shaped inserts. See table
below for installation instructions:
1-
Remove the 7 screws that retain the
side panels and the rear heat shield
deflector.
2-
Remove the side panels and clip the
U-shaped inserts (choose between gold
or nickel finish) at the top and bottom of
each panel.
3- Screw the side panels and heat shield
deflector back into place.
Table 2.1.2 Installation of the decorative u-shaped inserts
2.1.3 Door overlay installation
In order to complete the assembly of your freestanding Enerzone wood stove, you need to install
the door overlay. See table 2.1.3 below for installation instructions:
1-
Position the overlay on the door frame
and fix it in place from behind using the
4 screws.
Note: It is not necessary to remove the
glass or any other component to install
the overlay.
Table 2.1.3 Door overlay installation