Ethernet Module
Sinus H
11
2.6 Protocol Selection
For using the Sinus H Ethernet option module, there are 2 kinds
of protocol, Modbus TCP and Ethernet IP. You can select one of
the protocols by selecting the No.1 switch. The switch is placed
next to the Ethernet connector for Ethernet cable. No. 2, 3 and 4
of switch are not available.
Switch State
Protocol
OFF (Switch at the upper position)
Modbus TCP
ON (Switch at the lower position
Ethernet IP
If the option module is operating, protocol will be not changed
even if switch selection is changed. Protocol is determined by the
state of switch when the option module is turned on or the
inverter is initialized by ‘Yes’ execution of COM-94 Comm Update.
<The bottom side of Ethernet Communication Module >
1 2 3 4
Protocol select S/W (No.1 switch)
Ethernet connector
