9.0 Start Up and Verification, continued
92
704-939-B10-001 Rev. A5 (06/2019)
To change the CPE IP address allocation option from DHCP to Static via the Web Server, refer to the following:
1. Connect to DM3X Transponder via Web browser per the procedure in Section 4.0, Web Interface.
2. In the Advanced Configuration menu of the Web page, click the Communications button.
3. Click the Static button in the CPE Communications Module column of the page. Refer to Figure 9-10. When
prompted for User Name and Password, refer to Section 4.3.1, Web Interface Security Levels for User Name and
Security Password
4. Enter the desired IP Address, Subnet Mask and Gateway in the provided data fields.
5. Click the Set button to update the Communications Module with the new values.
6. Confirm the new Static IP Address is listed under the CPE Communications Module column of the General page.
Refer to Figure 9-11.
Fig. 9-10, Dual IP Configuration Settings for Web Server Communications Page
Fig. 9-11, Dual IP Parameters for Web Server General Page
