3
User’s Manual
Dear customer,
Thank you for choosing this ENERMAX power supply unit (PSU)! Please read this
manual carefully and follow its instructions before installing the PSU.
We would like to draw your attention that a computer required very specific conditions to work best
for you without failing. To avoid failures and to increase lifetime of the system, we suggest that:
Your system is NOT located near a radiator or any other heat producing device
Your system is NOT located near a magnetic device
Your system is NOT located in a moist and/or dusty and/or vibrating environment
Your system is NOT exposed to direct sunshine
Your system is sufficiently cooled by additional fans
If you use AC extension cables, please make sure it can support all connected appliances’
potential peak power draw. Or redistribute other high power consumption equipment, such as
laser printers or monitors to other AC wall outlets. Exceeding the extension cable’s loading
capacity could trigger its circuit breaker and cut off the power.
If you want to add the UPS (Uninterruptible Power Supply) for your system, please choose
adequate Watts/VA capacity UPS. Ex.
PSU Model
Suggested minimum UPS output power capacity
(Based on efficiency & PFC at respective load)
EMG500AWT
600W / 1000VA
EMG600AWT
700W / 1100VA
EMG700AWT
800W / 1200VA
EMG800EWT
1000W / 1400VA
EMG900EWT
1100W / 1600VA
* If you intend to add other appliance powered by the same UPS, such as monitor or printer,
please use higher capacity UPS according to all connected devices’ rated power draw.
* Please do not mistake VA capacity as Watts, or use insufficient power UPS. This would result
in
less UPS battery runtime or the inability to power the system in battery mode.
COMPATIBILITY
ENERMAX series is compliant with:
SSI PSDG 2008/2009 Power Supply Design Guide specification and downward compatible with
SSI PSDG 2008 1.0, EPS12V V2.92, 2.91 and 2.8 (800W/900W)
Intel ATX12V Power Supply Design Guide v2.3 specification and downward compatible with
v2.0, v2.01 and v2.2
ATX System Design Guide v2.2, v2.1
BTX/EEB/CEB/EPS12V
This PSU does not support MB with ISA expansion slot, which might need -5V power. -5V has been
cancelled from Intel ATX12V v1.3 specification onwards.
ENGLISH
