ENERGY SISTEM i824, User Manual

Page: 9 / 38

EN
GL
ISH
57
charging and not leave it loading more than 8 hours.
You have several ways to improve performance and optimize the use of the battery of your Energy ™ Tablet:
Set the screen off automatically after a few seconds of inactivity in Settings> Display> Screen timeout.
Choose optimal screen brightness level in the Settings menu> Display> Brightness.
Disable Wi-Fi if you're not using the Internet, go to Settings> Wireless & Networking> Wi-Fi.
To extend the battery life is not recommended to completely disable these energy saving systems.
8. SWITCHING ON/OFF
To switch on your Energy ™ Tablet, press the on / off (3) located on the side of the device for a few seconds. When the operating system has loaded you
will have to unlock the device to start using it. To do this drag your finger to the release bar (which appears on the bottom of the screen) to the right.
To power off press and hold the on / off until you see the shutdown menu, then choose "Off."
Briefly press of the button on / off (3) lock / unlock the device at the same time turned on or off the screen and activate the power saving mode.
9. SCREEN CALIBRATION
The touch screen of your Energy ™ Tablet must be properly calibrated to use the device with ease and precision. The system is calibrated at origin
and is ready to be used when it reaches your hands, but for various reasons, such as updating the firmware, reset the system settings or installing an
application that modifies the preset settings, recalibration may be necessary.
To recalibrate the touch screen manually, go to Settings> Calibrate the touch panel.
Self-calibration will start, it will finish after a few seconds and prompt you to press the button "OK" to finish.