Energy Save AWH11-V5+, User Manual, Page: 6 / 100

Copper
Steel Fuse
Main
Power Cable
RCD
Indoor
unit
When the power cord gets loose or is
damaged, always get a qualified
person to fix it.
It is mandatory to use a suitable
circuit breaker for the heat pump and
make sure the power supply to the
heater corresponds to the
specifications. Otherwise the unit
might be damaged.
Disposal of Scrap Batteries ---
Please discard the batteries as sorted
municipal waste at the accessible
collection point.
Installation of a residual current
device (RCD) having a rated
residual operating current not
exceeding 30 mA is advisable.
ON
OFF
Please select the correct fuse or
breaker as per recommended.
Steel wire or copper wire cannot
be taken as substitute for fuse or
breaker. Otherwise, damaged
maybe caused.
Be aware finger might be hurt by
the fin of the coil.
System water filling
T/P valve
Connect to heating/cooling system
Buffer tank
Connect to heat pump
One way valve
Filter
City water inlet
1. It's suggested to use pure water for filling the system.
2. If use city water for filling, please soften the water and add a filter.
Note: After filling, the system of water system should be 0.15~0.6MPa.
-5-
1.BEFORE USE