Energolux SAP24P1-A, Service Manual

Page: 27 / 46

Maintenance
1. Select FAN operation mode,
make the air conditioner run a
long time to dry
.
2. Turn off the air conditioner and cut off
the power supply.
4. Clean air filters and other parts.
3. Take out the batteries from the remote
controller.
Installation
The installation of air-conditioner should meet Installation Instruction .
The machine must be installed correctly by professional technicians according to the
Installation Instruction ..
Installation position
See Installation Instruction
For the purpose of safely, please turn off the air-conditioner and cut off the
power supply before cleaning.
Cleaning the indoor unit
Clean
WARNING:
1.Wipe the indoor unit with dry cloth .
2.If the indoor unit is very dirty, please wipe with wet cloth dipped by cold water.
3.The panel of indoor machine may be taken off. Dry it after cleaning with dry cloth.
NOTE :
Don't use dedusting products by chemicals or place close to the machine.
Don't use benzine, thinner or other similar solvent.
If the air filter is covered by dust, the cooling effect will be affected. Please regularly clean the
air filter.
1.Remove the screw on the top of the inlet panel. Grasp the inlet panel and gently pull forward
to yourself, then pull out the air filter.
2.Remove the dust on the filter by patting or with a vacuum cleaner. Please wash in warm
soapy water if too dirty, rinse and shake dry.
3. Dry the filter thoroughly then replace it.
Cleaning air filter
Technical Manual of Energolux Room Air Conditioner
27