2
Danger.
Risk of electric shock!
Danger to life due to high voltage.
There is residual voltage in the inverter which needs 5 min to discharge.
Wait 5 min before you open the upper lid or the DC lid.
Read the manual.
Product should not be disposed as household waste.
2. Safety
2.1 Appropriate Usage
This series inverter is designed and tested in accordance with international safety requirements. However,
certain safety precautions must be taken when installing and operating this inverter. The installer must read
and follow all instructions, cautions and warnings in this installation manual.
-
All operations including transport, installation, start-up and maintenance, must be carried out by qualified,
trained personnel.
-
The electrical installation & maintenance of the inverter shall be conducted by a licensed electrician and
shall comply with local wiring rules and regulations.
-
Before installation, check the unit to ensure it is free of any transport or handling damage, which could
affect insulation integrity or safety clearances. Choose the installation location carefully and adhere to
specified cooling requirements. Unauthorized removal of necessary protections, improper use, incorrect
installation and operation may lead to serious safety and shock hazards or equipment damage.
-
Before connecting the inverter to the power distribution grid, contact the local power distribution grid
company to get appropriate approvals. This connection must be made only by qualified technical
personnel.
-
Do not install the equipment in adverse environmental conditions such as in close proximity to
flammable or explosive substances; in a corrosive environment; where there is exposure to extreme
high or low temperatures; or where humidity is high.
-
Do not use the equipment when the safety devices do not work or are disabled.
-
Use personal protective equipment, including gloves and eye protection during the installation.
-
Inform the manufacturer about non-standard installation conditions.
-
Do not use the equipment if any operating anomalies are found. Avoid temporary repairs.
-
All repairs should be carried out using only approved spare parts, which must be installed in accordance
with their intended use and by a licensed contractor or authorized service representative.
-
Liabilities arising from commercial components are delegated to their respective manufacturers.
-
Any time the inverter has been disconnected from the public network, please be extremely cautious as
some components can retain charge sufficient to create a shock hazard. Prior to touching any part of the
inverter please ensure surfaces and equipment are under touch safe temperatures and voltage
potentials before proceeding.
Summary of Contents for Force 10.5S
Page 28: ...26...
