Energize EZPP20V2B, User Manual

Page: 14 / 24


Turn the function mode selector and let the pointer align to the drill mode that selects the drill
mode of action.
5.11 SPEED SELECTOR
The drill has a two-speed gear train designed for drilling at 1 (LOW) or 2 (HIGH) speed. A gear selector is
located on top of the drill to select either low or high speed. When you push the button forward and select
low speed range, the speed will decrease but will provide more power and torque. When using drill in the
high-speed range. Speed will increase but will provide less power and torque. Use low speed for high
power and torque application and high speed for fast drilling applications.
IMPORTANT! NEVER adjust this two-speed selector whilst the drill is running. Always let it
come to a complete stop first.
5.12 LED LIGHT
WARNING ! Do not stare directly at the light beam. Never aim the beam at any person or an
object other than the work piece.
Do not deliberately aim the beam at personnel and ensure that it is not directed towards the
eye of a person for longer than 0.25s.
5.13 DRILLING
14
 Turn the function mode selector and let the pointer align to the screwdriver mode that selects the
screwdriver mode of action.
The LED work-light can light prior to motor running if you press the switch lightly, which
allows
the
work area to be lighted for checking clearly at first, and it also
remains lit
during your operation.
(1) Drilling
Before us
ing
for drilling, the function mode selector should be set on drill position “ ”.
When drilling
into a
hard smooth surface, use a center punch to mark the desired hole location. This will
preventthe drill bit from slipping off center as the hole is started. Hold the tool firmly and place the tip of the
drill or bitinto the work piece, applying only enough pressure to keep the bit cutting. Do not force or
apply side pressure to elongate a hole.
(2) Wood drilling
For maximum performance, use high speed steel bits for wood drilling. Turn the function mode selector on
the drill mode “ ”. Begin drilling at a very low speed to prevent the bit from slipping off the starting point.
Increase the speed as the drill bit bites into the material. When drilling through holes, place a block of wood
behind the workpiece to prevent ragged or
splinter
ed edges on the back side of the hole.
(3) Metal drilling
For maximum performance, use high speed steel bits for metal or steel drilling. Turn the function mode
selector on the drill mode “ ”. Begin drilling at a very low speed to prevent the bit from slipping off the