Eco 250esm / 300esm / 280i / 200p
Page
8
5. INSTALLATION
Assembly Sequence
•
Solar Panel(s)
•
Hot Water Cylinder
•
Thermodynamic Block
•
Refrigerating connections (suction,
liquid)
•
Hydraulic connections
•
Electrical connections
•
Nitrogen supply
•
Vacuum
•
Installation start-up
5.1 Panel Fixation
It is important to take the characteristics of
the installation location and the inclination
angle of the panels into account. In order to
get maximum benefit from incidental Solar
Radiation, the panels must be at an
inclination of between 10° - 85° in relation to
the horizontal position, preferably orientated
towards the South.
It may be installed in a wall, façade, roof,
plain roof or other.
The panel comes already supplied with 6 M8
screws on the lateral tabs. The distance
between the holes in the location where the
panel is to be fixed must coincide with the
panel holes (Fig. 13):
Fig. 9 Profile fixing diagram
Fig. 10 Panel profile fixing process
1.
Profile (aluminium)
2.
Plastic wall plug
3.
Self-tapping screw (M6x40)
4.
Washer M6
5.
Screw (M6x20)
6.
Nut M6
7.
Panel
