Battery charger MVM
USER'S MANUAL
5. HOW TO USE THE CHARGER
HOW TO CONNECT THE BATTERY
•
Check that the charger is switched OFF
;
•
Select the battery voltage by moving the selection plug to the proper connector;
•
Connect the charger to the battery;
CHARGE OPERATION
Move the timer clockwise to start the charger.
Read immediately the output current on the ammeter, to make sure that it's not too high,
otherwise the output fuse of the charger will blow.
Attention:The operations described in this chapter are done by
Energic Plus
MVM
chargers automatically.
Attention:
This battery charger is not automatic, therefore if it's not set
properly the battery may be damaged.
It's necessary to survey the operation and keep the battery
temperature always under control while it's connected to the
charger.
END OF THE CHARGE
When the timer reaches the position zero, the charger switches off.
If it's necessary to interrupt the charge before the normal termination, it's necessary to switch
of the charger by moving the timer manually to zero.
Attention:
Before disconnecting the battery, make sure that the charger is off, to
avoid dangerous sparks between connectors.
- End of Manual -
__________________________________________________________________________________________________________________________________________________
Code: OWM-MVM-261006
Page 9/9