Battery charger MVM
USER'S MANUAL
4. INSTALLATION OF THE CHARGER
Conditions of use:
•
Operating temperature:
5°C to 45°C
•
Storage temperature:
-20°C to 60°C
•
Relative humidity:
less than 75%
Caution:
The charger can be installed by qualified personnel only.
Attention:
Check that the unit’s maximum input power is available from your
power supply. Check that the unit’s operating voltage is identical
to your local power supply.
Attention:
To prevent fire or shock hazard, do not expose the unit to rain or
moisture.
Do not use the unit in presence of flammable gas, because it can
generate sparks.
Caution:
To avoid electrical shock, do not open the cabinet. Refer servicing
to qualified personnel only.
Attention:
Allow adequate air circulation to prevent internal heat buildup.
Do not place the unit near materials that may block the ventilation
slots.
Do not install the unit near heat sources such as radiators or air
ducts, or in a place subject to direct sunlight, excessive
dust, mechanical vibration or shock.
CONNECTION OF THE CHARGER
•
Check the efficiency of earth circuitry;
•
Connect the charger to the mains using an adequate plug, with switch and fuses;
•
Use an adequate plug to connect the charger to the battery;
__________________________________________________________________________________________________________________________________________________
Code: OWM-MVM-261006
Page 7/9