Energetics TZ-2113, Computer Manual

Page: 4 / 16

www.energetics.eu
4
The display and it’s symbols
Button Functions
MODE
1. Press the button to select TIME, DISTANCE and CAL to preset, and enter after setting.
2. Press the button to scan trough the values in the display (Time – Calories – Odometer – Pulse – Speed – Distance).
3. Press the button and hold for 2 seconds to reset all values to zero (except odometer).
SET
To adjust the target value of TIME, DISTANCE and CAL.
Press the button and hold for 2 seconds to speed up the increasing.
RESET
Press the button to reset the value.
Press the button and hold for 2 seconds to reset all values to zero (except odometer).
Functions & Operations
Batteries Installation
Insert 2 pieces of AA 1.5V batteries in the battery case on the back of monitor.
Whenever batteries are removed or replaced, all values will be reset to zero except for the odometer.
Speed (km/h)
Time (min; sec)
Distance (km)
MODE – scans through
display functions
SET – to confirm the
selection or value &
increase the parameters
RESET – to set all values
back to zero (hold button)
Odometer
accumulates total
distance (km)
Pulse
(beats per minute)
Calories burned