Energetics CT 3.6, Assembly Manual

Page: 9 / 56

9
EN
DE
CS
SK
HU
Manual adjustment
The resistance can be changed by turning the resist-
ance knob. To increase the resistance turn the knob
clockwise, to decrease it counter clockwise.
Computer controlled adjustment
The resistance can be Increased or decreased on the console (if applicable). Please consult the computer manual
for further information.
Resistance Adjustment
Training instructions
Check
www.energetics.eu
for detailed training instructions.
Mechanical Troubleshooting
The repair steps marked in Italic below must be carried out only by a qualified technician. Please contact your point
of sales for further instructions. INTERSPORT declines all responsibility in case of repairs that have been carried out by
unqualified personnel.
Problem Solution
Computer display does not work at all
or partially. 1. Check power supply.
2. Check cable connections.
3. Replace the computer.
Pulse does not work. 1. Clean hand pulse plates.
2. Check cable connections.
3. Check if pulse cable is plugged-into computer.
4. Moisten your palms.
5. Let another person check the pulse function, on a small percentage of
the population the hand pulse is not readable.
6. Replace hand-pulse plates.
7. Replace computer.
What does the POLAR® logo mean? ENERGETICS products that carry this logo can be used with a uncoded
chest belt.