14
GB
IE
15
GB
IE
Getting started...
ENB522TCB by
Energer
ENB522TCB by
Energer
In
more
detail...
Product
functions
Care
and
maintenance
Trouble
shooting
Guarantee
EC declaration
of conformity
Operation
Recycling
and
disposal
GB
IE
In more detail...
GB
IE
In more detail...
Product functions
15
16
18
19
19
20
21
1.
To cut angled corners, position the angle cutting guide onto the fence;
ensure the tile sits flush to the table bed and slowly move the guide
along the fence. Unlock button (1) to adjust the angle of the cut
1
Cutting guidance
Put the tile cutter on a clean, stable and flat surface.
WARNING:
Before switching the tile cutter on, make sure
that you have read and understood all of the safety
instructions. Make sure also that the machine has been
correctly assembled and adjusted. Make sure that the
mains is disconnected from the supply when the tile cutter
is not being used or adjustments are being made.
WARNING:
This machine must be powered through a
residual current device (RCD).
WARNING:
The disc will continue to rotate for a few
seconds after the machine has been switched off. Wait
for the disc to stop before removing the workpiece or
making any adjustments.
