6
EGM-PWM ENERGY METER
All brands and logos are registered trademarks of their respective owners
Note:
Avoid damp or wet places for installation
EGM-PWM should be connected to a European AC wall socket
of the DIN 49 440 (German Schuko type) standard
It is possible to connect the EGM-PWM to the power mains via
socket strips, surge protectors, voltage regulators or a UPS
3. Connect the EGM-PWM (see Figure #1 above) to your computer
with the supplied USB cable.
4. Plug any device into the
Socket
(see Figure #1 above) of the EGM-
PWM and you are ready to measure its energy consumption.
5. Software installation
Insert software CD into the PC CD-ROM drive.
If for any reason the automatic setup does not work, please use
the “My computer” window to open the CD-ROM drive folder and launch
SETUP.EXE from the CD.
Follow the on-screen instructions of the installation software.
Once the setup is completed the Power Manager software will
open automatically (see chapter 6 below).
