7
EG-PMSU
PROGRAMMABLE USB POWER STRIP
All brands and logos are registered trademarks of their respective owners
2.1. Indicators
Main rocker switch
Z (see Figure #1 above) is lit – this means that
EG-PMSU is connected to the power supply and active. It also
means that the non-manageable socket E is switched on.
The
indicator
Socket A (B,C,D)
(see Figure #1 above) is lit – this
means that this particular socket is switched on.
2.2. Audible signals
Long beep – will be heard after EG-PMSU is successfully connected
to the computer USB port after the self-test.
Short beep – will be heard by switching the manageable sockets on
and off.
Continuous beeps – hardware event schedule is lost – for example if
the power supply was cut for a long time. These beeps can be
stopped by pressing the
Silence button
(see Figure #1 above).
Alarm beep – will be heard if the managing command cannot be
executed. E.g. if there is a command to switch the socket on but EG-
PMSU is disconnected from the power supply. The alarm will be
heard every second during a minute, after that every 8 seconds. Let
EG-PMSU execute the command (e.g. switch EG-PMSU on) to get
rid of the alarm beeps.
