27
EG-PMS-LAN PROGRAMMABLE LAN
SURGE PROTECTOR
All brands and logos are registered trademarks of their respective owners
NOTE:
The hardware schedule keeps running even when the device
is powered off. However it is recommended not to power off the device
for longer than 1 week, because the built-in battery might get discharged
then. In this case the internal clock of the device would be reset and as
result some schedule events would not be executed. Besides all the
sockets would lose their previous status (they will be switched on). Leave
the device switched on for one day to fully charge the battery.
4.4. Socket Name settings page
On the
Socket name settings
page (see Figure #9 below) you can
assign an applicable name to your sockets. These names will be shown
on
EnerGenie
page (see section 4.2 above) as well as on the
Socket
pages (see section 4.3 above).
NOTE:
The socket names can not be longer than 11 characters.
HINT:
Call your socket by the device which is attached to this socket.
For example call Socket 1 – TV set if your TV is connected to this socket.
