14
EG-PMS-LAN PROGRAMMABLE LAN
SURGE PROTECTOR
All brands and logos are registered trademarks of their respective owners
the excessive load first and then press the
Circuit breaker
button to
restore the power supply (see Figure #3 above).
To be able to use EG-PMS-LAN you will now have to complete its
LAN configuration.
3.2. Preparing LAN configuration of EG-PMS-LAN
Before configuring EG-PMS-LAN hardware settings, please, let it
obtain its IP address. Follow the steps below:
Make sure EG-PMS-LAN is connected to the local network with the
provided RJ-45 cable (
option A
- recommended)
NOTE:
by default the factory setting of EG-PMS-LAN is DHCP enabled.
If your LAN has a router with built-in DHCP server (which is very
common) then EG-PMS-LAN will automatically get an IP address from
the DHCP server. Proceed to section 3.3 below in this case.
NOTE:
you may prefer to connect EG-PMS-LAN directly to the
managing computer LAN adapter (network card) using the supplied
crossover
RJ-45 cable (
option B
). You might need to use this option if
your LAN does not have DHCP server.
