Energate Pioneer Z100 Smart Thermostat, Operating And Installation Manual

Page: 28 / 52

Temperature Units and Calibration
The display can be set to display Fahrenheit (°F) or Celsius (°C) units. Also if you measure the
temperature yourself and believe the thermostat’s displayed temperature is off slightly you can
easily calibrate the thermostat’s display by up to +/- 5.4°F (+/- 3°C) by following these steps.
SELECT TEMPERATURE from the Main Menu.
Change the UNITS by pressing MENU / SELECT on the UNITS
line, then SCROLL between FAHRENHEIT (°F) and CELSIUS
(°C).
To calibrate the thermostat, select the OFFSET line. Press
MENU /
SELECT , then SCROLL to change the offset.
Press SAVE CHANGES to accept the new settings, then press
EXIT to return to the main menu.
Service Information
Information regarding your service contractor can be programmed into the thermostat for future
reference.
Choose SERVICE from the main Menu.
Press EDIT NAME and enter the name and contact information
using the
MENU / SELECT button to navigate to each letter
position and the SCROLL buttons to change each letter.
After pressing SAVE CHANGES scroll to the next line if you need
to enter additional information; then follow the procedure just
described.
Page 28