Energate Pioneer Z100 Smart Thermostat, Operating And Installation Manual

Page: 21 / 52

Voluntary Energy Event
In the case of a Voluntary Energy Event you may accept the modifications suggested by your utility,
or you can either Override the event or Opt-Out of it.
Overriding a Voluntary Energy Event: You can override an Energy Event while the event is in
progress by choosing SETPOINT values that result in higher energy consumption than the values
specified by the event. This is done from the Home Screen by pushing the up or down arrow
buttons just as you would when setting a Temporary Hold.
When an event is overridden, the SETPOINT values selected
during the Override operation will be applied as if it were a
Temporary Hold. The Home screen will display TEMPORARY,
under the current room temperature.
This Override condition will end when the event ends or a new
event starts.
Opting Out from a Voluntary Energy Event: You can Opt-Out from Voluntary Energy Events by
selecting the Energy Options menu from the Main menu selecting Opt-Out. If you change your
mind, you can Opt-In by selecting Opt-In from the Energy Options menu. Note that once you select
to Opt-Out you will be excluded from all future voluntary energy events until you select to Opt-In
again.
Page 21