Page 11
5. Testing the Power Inverter:
•
Enerdrive Power Inverter is ON. AC output is now available.
•
Plug in a small AC load like a 25W table lamp or small appliance to the AC socket to verify AC is
available.
•
The unit is successfully installed and functioning properly.
6. Unit Operation
WARNING: RISK OF EQUIPMENT DAMAGE
• Do not connect an AC power source like utility power or generator to the unit AC outlets.
Turn ON and OFF the unit
•
Press the power switch to turn the unit on. “Power” indicator LED will turn green.
•
‘Power’ indicator will turn green.
•
AC Output is available at the AC output socket.
•
Understanding the ‘Status’ indicator & the unit warning & fault alarm
Status’ indicator:
•
Illuminated in green indicates unit is ON. AC is available at the AC Output Socket.
•
Illuminated in green and alarm is beeping once every 2 second indicates a warning signal from the
unit. The unit is close to shutdown with one or more of the following warning conditions:
Over Temperature Warning:
Unit internal temperature is high. Unit requires better ventilation
DC Over Voltage Warning:
DC Input Voltage is high and close to the unit over voltage shutdown
limit. Check the battery voltage.
DC Under Voltage Warning:
DC Input Voltage is low and is close to the unit under voltage shutdown
limit. Check battery voltage or battery connection.
More information https://www.caravansplus.com.au
