10
26
4. TECHNICAL SPECIFICATIONS
FUSES (DIN 41661) - (Recommended)
•
µD-TAC (230/115V AC) .............................F 0.1A / 250 V
•
µD-TAC2 (24/48V AC) ................................. F 2A / 250 V
•
µD-TAC3 (12 V DC)..................................... F 1A / 250 V
•
µD-TAC4 (24 V DC)...................................F 0.5A / 250 V
•
µD-TAC5 (48 V DC)...................................F 0.5A / 250 V
DISPLAY
•
Type ....................................... 9999, 7-segment red LED
•
Junior-TAC .......................................4 digits, 14mm high
•
Junior20-TAC....................................4 digits, 20mm high
•
Decimal point ...........................................programmable
•
LED’s .................................................. 2, setpoint status
•
Overrange indication................................................ OvE
ENVIRONMENTAL
•
Operating temperature..........................-10 ºC to +60 ºC
•
Storage temperature.............................-25 ºC to +85 ºC
•
Relative humidity (non condensing) ........ <95 % at 40 ºC
•
Max. altitude .......................................................2000m
DIMENSIONS
•
Dimensions .............................................. 96x48x60 mm
•
Panel cutout .................................................. 92x45 mm
•
Weight ..................................................................250 g
•
Case material .........................polycarbonate s/UL 94 V-0
•
Frontal sealing........................................................ IP65
INPUT
•
Max. frequency......................................................7 KHz
•
Min. frequency .....................................................0.1 Hz
•
Excitation........................8V @ 20mA or 22V
±
5 @ 20mA
Magnetic pickup
•
Sensitivity............................. Vin (AC) > 120 mV eff.
NAMUR sensor
•
Rc.............................................1 K
Ω
(incorporated)
•
Ion.........................................................< 1 mA DC
•
Ioff ........................................................> 3 mA DC
NPN and PNP type sensors
•
Rc.............................................1 K
Ω
(incorporated)
•
Logic levels............... “0” < 2.4 V DC, “1” > 2.6 V DC
TTL/24V DC (encoder)
•
Logic levels............... “0” < 2.4 V DC, “1” > 2.6 V DC
Contact closure
•
Vc..................................................................... 5 V
•
Rc..........................................3.9 K
Ω
(incorporated)
•
Fc ................................................................100 Hz
ACCURACY AT 23º ± 5º C
•
Max. error..................± (0.01% of the r1 digits)
•
Temperature coefficient .............................. 100 ppm/ ºC
•
Warmup time ..................................................5 minutes
POWER SUPPLY
•
AC ................................230/115 V, 24/48 V 50/60 Hz AC
•
DC.........
12V (10.5 to 16 V), 24V (21 to 32 V), 48V (42 to 64V)
•
Consumption........................................................... 3 W
2.3 – Instrument’s setup
The enclosed diagram shows the
complete programming routines
for models µD-TAC.
a) The basic parameters, which
refer to the input and display
configuration are organized into
two modules: "InP" and "dSP".
b) If a 2-relay option is installed
(see page 27), the module "Set",
that allows configuring the option,
is automatically included in the
routines.
c) If a 2-relay option is installed,
the setpoint values programming
is directly entered from the Pro
stage.
At the end of each module, the
indication Stor appears while data
is saved in the memory.
