8
Buttons on Remote Controller
After connecting the power, the air conditioner will be make a sound.
Power indicator is NO.After that, you can operate the air conditioner by using
remote controller.
In state of turning on, pressing the button on the remote controller, the air
conditioner will make a “beep” sound, which means the signal has been sent to the
air conditioner. The display will show the corresponding setting function icons.
In state of turning off, light and clock icon will be displayed on the display of remote
controller (If timer on, timer off and light functions are set, the corresponding icons
will be displayed on the display of remote controller at the same time).
On/Off button
Press this button can turn on or turn off the air conditioner.
Mode button
Press this button to select your required operation mode.
●
When selecting auto mode,air conditioner will operate automatically according to
ex-factory setting. Setting temperature can’t be adjusted and will not be displayed as
well. Press
“
Fan
”
button can adjust fan speed. Press
“ ” or “ ”
button can
adjust fan blowing angel.
●
When selecting cool mode, air conditioner will operate under cooling mode. Press
“
” or “
” button to adjust setting temperature. Press “Fan” button to adjust fan
speed. Press “
” or “
” button to adjust fan blowing angle.
●
When selecting dry mode, the air conditioner will operate in fan1, fan speed can’t be
adjusted.
Press
“ ” or “ ” button to adjust fan blowing angle.
●
When
selecting
fan
mode,
the
air
conditioner
will
only
blow,
no
cooling
and
no
heating.
Press
“Fan”
button
to
adjust
fan
speed.
Press
“
”
or
“
”
button
to
adjust
fan
blowing
angle.
●
When selecting heat mode, the air conditioner will operate in heating mode. Press
“
”
or
“
”
button
to
adjust
setting
temperature.
Press
“Fan”
button
to
adjust
fan
speed.
Press
“
”
or
“
”
button
to
adjust
fan
blowing
angle.
(Cooling
only
unit
won’t
receive
heat
mode
signal.
If
setting
heating
mode
with
remote
controller,
press
ON/OFF
button
can’t
start
up
the
unit).
Note:
●
To preventing cold air, after starting up heating mode, indoor unit will delay 1~5
minutes to blow air (auto delay time is depend on indoor ambient temperature).
●
Setting temperature range from remote controller:16~31°C; Fan speed:auto, fan1,
fan2, fan3, fan4, fan5, turbo, stepless speed.
