ENER-J K10DW, Installation Manual

Page: 2 / 106

1
To avoid electric shock while installing the Receiver,
please disconnect the mains voltage (switch off circuit
breaker) before installation. Failure to observe the
installation instructions can cause fire or other hazards.
Do not attempt to service or repair the product yourself.
We recommend the installation by a qualified Electrician
only. Do not continue to operate the product if it
becomes visibly damaged.
*Work on 230 V mains supply shall only be carried
out by Licensed Electricians.
www.ener-j.co.uk
Important note: Wi-Fi frequency is 2.4GHz and
not 5GHz (5GHz not supported). You can do this
by contacting your broadband service provider and
requesting to either switch to 2.4GHz entirely or split
it between 2.4GHz and 5GHz.
English