1.0 Installation
- 3 -
Operating Instructions Text Display
3
Dear Customer!
Thank you for your decision to use the Text Display TD in your system.
We ask you to read thoroughly through the brief instructions, so that you can use the
TD functions in an optimum way for your application.
Before installing the equipment, please read the safety instructions on page 18.
Check the included accessories for completeness:
•
1 x 9 pin D-SUB null modem cable
•
1 x plug-in power supply 9 VDC or 12 VDC, 800mA
•
1 x CD-ROM with installation software
•
1x 3pole terminal block.
Please contact your dealer directly, if any of the accessories should be missing!
1.0 Installation
1.1 PC Setup Dialog
The PC setup program for the text display uses the Windows 95/98 operating system.
The screen resolution should be set to at least 800 × 600 and the number of colors
should be set to
True Color
.
To install the program from the included CD-ROM, run
Setup.exe
in the “TD” folder.
Follow the program instructions and ins tall the TD setup in the desired folder.
After the installation has been completed, start the program
TD
via the standard
Windows menu
Start
4
Program Files
4
TD
. The setup program for the text display
will be executed.
The program can be uninstalled via the Windows 95/98 control panel menu “
Software
”.
1.2 Text Display
Please connect the video signal of the video camera to the BNC input and connect the
output to the monitor.
After connecting the power supply, the yellow “Power LED” lights up and the video
picture briefly shows the on screen camera text. The text display is now initialized and
ready for operation.
To configure the TD, connect the RS232 interface to a serial port (COM1 through
COM4) of a PC or a laptop. Use the included null modem cable fo r that purpose.
After starting the PC setup program, you can program the unit.
