4
MOTION
Factory Default Descriptions
AREA SELECT
AREA1
Selects one of 4 areas, AREA~AREA4, to be adjusted.
AREA DISPLAY
ON
If set to ON, the window selected by AREA SELECT appears and enables the
motion detection for that area and vice versa.
HOR. MOVE
12
Moves the window selected by AREA SELECT leftward or rightward.
To see the moving, AREA DISPLAY should be ON.
WIDTH
32
button decreases and
button increases WIDTH of the window
selected by AREA SELECT at rightmost
To see the change, AREA DISPLAY should be ON.
VER. MOVE
7
Moves the window selected by AREA SELECT upward or downward.
To see the moving, AREA DISPLAY should be ON.
HEIGHT
24
button decreases and
button increases HEIGHT of window selected
by AREA SELECT at bottommost
To see the change, AREA DISPLAY should be ON.
SENSITIVITY
40
SENSITIVITY is adjustable between 0 and 40 for the window selected by
AREA SELECT.
MOTION VIEW
OFF
MOTION VIEW setting is applied for all areas.
If set to ON, motion result is displayed as green coloured video.
If set to OFF, motion result is not displayed.
5.8.2 MOTION Menu
To enter MOTION menu, press
button at
MAIN > SPECIAL > MOTION > ON
.
Up to 4 motion detection areas can be programmed in size, position, sensitivity and display on/off.
If MOTION in MAIN > SPECIAL menu is set to ON, „MOTION” is displayed on the monitor whenever the motion is
detected and the digital effect appears if MOTION VIEW is set to ON.
Summary of Contents for VKC-1327B-IR/W3
Page 47: ...47...
