3
Description of components
() Fixing screws for securing camera base to panel (3)
(3) Panel for attachment to the flush-mounted socket
(4) Panel for attachment of camera
NOTE: Screws for attachment to the flush-mounted socket
are not included.
Easy-Installation cable
. Connect plug socket (camera side) and plug (cable side),
slightly loosen the 3 screws that hold the neck (0) (but do
not undo them completely!), so that the body of the camera
can move.
. Adjust the camera angle. The panel nut (3) must be
inserted in the hole in the camera assembly panel (4).
13
14
11
W3 INST-KIT1 assembly kit is installed with the camera on
the flush-mounted socket.
. Using the screws, secure the camera on the W3 INST-KIT
assembly kit.
. Re-tighten the 3 screws that hold the neck.
NOTE:
Flush-mounted socket, screws for the kit assembly
panel and screws and rawl plugs for wall
attachment are not included.
4.2.3 Assembly on a flush-mounted socket (with the installation kit W3 INST-KIT1,
Art. No. 88148
)
With the aid of the W3 INST-KIT, the camera can be installed onto standard flush-mounted sockets.
Wall
Flush-mounted
socket
Summary of Contents for VKC-1327B-IR/W3
Page 47: ...47...
