Eneo PXD-2080Z03 D, Quick Installation Manual

Page: 25 / 36

Operating Instructions
25
NETWORK AF ZOOM CAMERA
Set the direction of video by MIRROR/FLIP before POINTING ZOOM setting.
Otherwise location of zoom center could be different from your intention.
CAUTION
7. HOME POSITION
(default: OFF)
6. PRESET ZOOM
(default: OFF)
Able to zoom in for the preset area from NVR, VMS or Web viewer.
PRESET ZOOM
ZONE NUM
ZONE VIEW
H-POS
V-POS
O-ZOOM RATIO
D-ZOOM RATIO
STAYING ZOOMING
RETURN
↵
1
ON
5
5
3sec
OZ X2.0
DZ X2.0
RET ↵
By Remote Controlloer only.
• ZONE NUM : Set a number to select a preset zoom from 1~ 4.
• ZONE VIEW : ON enables a relevant preset zone.
• H-POS and V-POS : Adjust the size and position of preset zone.
• O-ZOOM RATIO: Set the Optical Zoom Ratio from OX 1.1~OX3.0
• D-ZOOM RATIO: Set the Digital Zoom Ratio from DX 1.1~DX5.0
• STAYING ZOOMING : Sets the duration time for preset zoom area.
• O-ZOOM RATIO: Sets the Optical ZOOM positon as Home Position. (x1.0~x3.0)
• DURATION: When ZOOM IN/OUT control is accomplished, camera returns to
pre-defined Zoom position after Duration time.
If SMART MOTION / PRESET ZOOM are running, duration for Home position
starts after finishing SMART MOTION / PRESET ZOOM.
: Camera can be configured to return to pre-defined Zoom position automatically
after certain period since ZOOM IN/OUT control is accomplished.
Home Position is recovered even after camera is re-initializing or Power ON/OFF.
[ Web-viewer]
(See page 30 “Setting Tip for Zoom functions” for more information)