2.1.1
Installation - Wall Mount
The wall mounting plate must be attached to a structural object such as concrete that will
support the weight of the mount and Dome Camera.
1. Select a suitable mounting location and verify there is sufficient cable to reach the
middle of the Wall Mount.
2. Mark and drill mounting holes in the surface using the Wall Mount Flange.
3. Pull out cables required to connect to the dome camera from the wall or route cables
through a section of 0.75 in. (19 mm) conduit pipe.
4. Remove the access plate from the wall mount bracket.
5. Attach the wall mount bracket using screws routing cables through the access plates
hole.
6. Attach the housings safety wire to the wall mounts latch.
7. Fix the housing to the wall mount bracket using the locking nut after routing cables
through the wall mount bracket and tighten the housing set screw with the supplied
wrench.
8. After connecting cables, attach the access plate.
9
