8
CAUTION:
Extreme care should be taken NOT to scratch the surface of win-
dow while the camera installing or adjusting.
Care should be taken the cable is NOT to be damaged, kinked or
exposed in the hazardous area.
Do not expose the camera directly to a strong light source such
as the sun or spot light.
Pan & Tilt adjustments
• Unlock the screw on the camera bracket through using the torque wrench supplied
• Set the camera’s viewing angle then lock the screw on the bracket.
1. Pan limit: Pan is limited to +/- 90°.
Assembly Screw: 4x15mm
Torque Wrench
Mounting Screw: 4x30mm
Cable exit
REAR VIEW
