manualshive.com logo in svg

Eneo IPB-75M3610M0A, User Manual, Page: 36 / 64

Share
Download
Eneo IPB-75M3610M0A User Manual Download Page 36

LDC(Simple-Lens Distortion Correction) transforms the picture captured  by wide 

angle lens to natural. It can correct distortion of vertical direction only, horizontal 

direction is remained curve.

●

 DNR

●

 LDC

> BLC:

   Improves the visibility for the dark object by the bright backlight. 

   Outside area of BLC window can over saturate.

   Set the Mode On/Off and Level to enable the backlight compensation function.

> HLC:

   Cuts out the highlight area with black mask and excludes it from compensation.

   Set the Mode On/Off to enable the highlight compensation function.

2D-NR / 3D-NR Control:

The noise reduction (NR) function eliminates image noise in order to improve the 

image quality of the cameras. They consist of the 2D-NR function which eliminates

noise for a single frame while monitoring the correlation of the pixels, and links with

3D-NR to suppress noise. The 3D-NR function which reduces noise using the frame

memory while factoring in the correlation between multiple frames.

> Mode: Set the Mode On/Off.
> Level: Configure one of Level 1~4.

> Mode: Set the Mode On/Off.
> Level: Configure one of Level 1~92
> Boundary Line: Set the distortion line display On/Off 

Full Menu Setup

36

VerticalView

Summary of Contents for IPB-75M3610M0A

































































Reviews:

No comments