manualshive.com logo in svg

Eneo IPB-75M3610M0A, User Manual, Page: 22 / 64

Share
Download
Eneo IPB-75M3610M0A User Manual Download Page 22

•  5.04Mega Pixel, NETWORK CAMERA, 2592x1944(15p/12.5p)
•  ONVIF Conformance
•  Zero configuration
•  Cross Web Browsing (IE, Edge, Safari, Firefox, Chrome)
•  Adaptive web resizing depending on layout & resolution of
   display device by RESPONSIVE WEB
•  Increased usability for all PC, tablet and mobile
•  Simultaneously H.264 & MJPEG (Triple streaming)
•  2 Way Audio & Alarm input/output
•  ONVIF Event Mapping
•  HTML5 playback
•  Slot for Micro SD memory card
•  f=3.6~10mm F1.5, 6Mega pixel Motorized Zoom lens
•  Dual Filter Switcher
•  SNAP Focus by Motorized Zoom lens
•  Motorized Zoom & Focus Adjustment
•  D-WDR (Digital Wide Dynamic Range)
•  Improved noise figure with the enhanced 3DNR
•  Motion Detection, Privacy Mask, Tamper, Defog, BLC/HLC, Hue, 
   D-Zoom(~16x), Mirror/Flip, LDC(Lens Distortion Correction), Contrast, 
   Brightness, Saturation, Sharpness, Auto-Flickerless, VerticalView
•  Circuit protection against faulty connection in power polarity
•  Isolated power supply against ground loop problem
•  PoE(IEEE Std. 802.3af) & AC24V/DC12V
•  Built-in 4pcs High power LED
•  Built-in LED Auto/Off Switch
•  Built-in Fan & Optimized Cooling system
•  Dual Window
•  One touch 3-Axis locking bracket
•  IP67 Protection

General Description

22

Summary of Contents for IPB-75M3610M0A

































































Reviews:

No comments