manualshive.com logo in svg

Eneo IPB-75M3610M0A, User Manual, Page: 33 / 64

Share
Download
Eneo IPB-75M3610M0A User Manual Download Page 33

> Mode: Configure the options for White Balance. 

   Select one of ATW-Indoor/ Outdoor, Shade, Clear sky, Fluorescent light, Light 

   bulb, Flames, Manual options according to light conditions. The default setting

   is ATW-Indoor. 
> Cb Gain: 

   Adjusts the picture output in the blue range. The White balance B gain can be

   adjusted in the range 10~255, where a higher value produces a higher blue image.

   The default setting is 20. It is activated to set to ‘Manual’ in Mode. 

> Cr Gain: Adjusts the picture output in the red range. The White balance R gain 

   can be adjusted in the range 10~255, where a higher value produces a higher red

   image. The default setting is 20. It is activated to set to ‘Manual’ in Mode. 

●

 AF

> Mode: Configure the options for Auto Focus. The default setting is Manual. 

   Manual mode can be adjusted by PTZ control in Live View. 

   Automatic mode is the AF function is always working.

> Speed: Set the focusing speed level up to 4.

[NOTE]

 Automatic mode may have an adverse effect on the lifetime of the camera.

> Lens Locking : Enable only set to Manual mode. It is used to fix the focus from 

   the possibillity of change by motorized lens.
> Locking Timer : Enable to set the lens locking time after camera setup.

   Default is 24 hours. Lens is locked at 24 hours after installation. 

33

Full Menu Setup

VerticalView

VerticalView

Summary of Contents for IPB-75M3610M0A

































































Reviews:

No comments