50
●
Alarm Out :
3-6-2. Actions
Configures the alarm output supported by the camera. Port can be given as NO
(Normally Open) or NC(Normally Close) state, and its Normal state can be
configured. Click the checkbox to activate the type of Alarm out port.
●
E-mail :
Use the Simple Mail Transfer Protocol (SMTP) server to send an email notification
when an event server is activated. The camera can be configured to send event
and email messages via SMTP.
If your mail server requires authentication, click the Use (SMTP) authentication
checkbox for use authentication to log in to this server.
> Sender: Click in the Sender box and enter the Email address as the sender.
> Interval: Enter the Email sending time interval after event occurred.
> Aggregate events: Enter the number of events for Email sending. If the event
numbers are reached the setting value, Email sending is available.
> Use Email server:
Click the Use Email server checkbox and provide the following information for
Email server.
> Mail Server:
Enter the host names or IP addresses for your mail servers in the fields provided.
> Video stream: Set the recording stream source.
> Recording time: Set the post-event recording time
> Pre recording time: Set the pre-event recording time
●
Record :
Setting for the video stream, Recording time, Pre-recording time
Full Menu Setup
