77
6) Maintenance
•
Maintenance:
– Restart:
The unit is restarted without changing any of the settings. Use this
method if the unit is not behaving as expected.
– Reset:
The unit is restarted and most current settings are reset to factory default
values. The settings that are not affected are:
·
the boot protocol (DHCP or static)
·
the static IP address
·
the default router
·
the subnet mask
·
the system time
– Default:
The
Default
button should be used with caution. Pressing this will return
all of the network camera’s settings to the factory default values (including the IP
address).
•
Upgrade:
Upgrade your camera by importing an upgrade file and pressing the
Up-
grade
button. During the upgrade, do not turn off the power of the network camera.
Wait at least five minutes and then try to access the camera again.
•
Backup:
Save the setting values that users have entered to the network camera to a
user PC.
•
Restore:
Import and apply a setting value previously saved to a user PC.
NOTE:
Backup and Restore can only be used on the same unit running the same firmware. This
feature is not intended for multi-configurations or for firmware upgrades.
